Description
The new ACCRA TOUR Z TZ6 Driver Shafts are available in 4 different weights (45, 55, 65, & 75) and a matching hybrid shafts (85H) with multiple flex options.
This is a unique design that will appeal to the average golfer in the M3 and M4 flexes as a mid/high launching driver shaft that will control spin and add power with an active tip section.
Where this shaft really shines is as a mid/high launching shaft in M4 and M5 flexes for the accomplished golfer. This is a spin killing machine that feaTOURes 2.0 torque combined with the explosive tip section. New high modulus composite materials enable ACCRA to maintain “feel” while introducing extremely low torque. Stability is achieved in the combination of ACCRA’s proprietary design in the butt section for unparalleled strength without effecting “feel” and the addition of a new material technology in the tip section creating an unequaled torsional strength along with a faster recovery speed than any shaft ACCRA has ever produced
IMPORTANT Shipping Details SHAFT SPECS:
Model Type Flex Mass Balance Pt. S3 Launch Butt Ei Mid Ei Tip Ei S3 CPM Torque Length Butt OD Tip OD Parallel TZ6 45 Driver M3 50 23.0 11.7 75 44 18 258 4.0 46 .600 .335 4 TZ6 45 Driver M4 52 23.0 11.7 84 45 20 269 3.9 46 .600 .335 4 TZ6 55 Driver M3 62 23.0 11.6 75 44 20 258 2.7 46 .600 .335 4 TZ6 55 Driver M4 62 23.0 11.6 84 45 21 269 2.7 46 .600 .335 4 TZ6 55 Driver M5 62 23.0 11.6 95 48 22 280 2.6 46 .600 .335 4 TZ6 65 Driver M3 66 24.0 11.6 75 44 20 258 2.6 46 .600 .335 4 TZ6 65 Driver M4 69 23.5 11.6 84 45 21 269 2.4 46 .600 .335 4 TZ6 65 Driver M5 72 23.5 11.6 95 48 23 280 2.4 46 .600 .335 4 TZ6 75 Driver M4 80 23.5 11.6 84 45 21 269 2.1 46 .600 .335 4 TZ6 75 Driver M5 80 23.5 11.6 95 48 23 280 2.1 46 .600 .335 4 TZ6 85 Driver M5 90 24.0 11.0 94 51 28 280 2.1 46 .600 .335 4 TZ6 85H Hybrid M3 85 20.5 12.2 67 38 21 265 2.5 42 .600 .370 4 TZ6 85H Hybrid M4 86 21.0 12.2 74 44 24 280 2.5 42 .600 .370 4 TZ6 85H Hybrid M5 88 21.0 12.2 87 49 29 295 2.5 42 .600 .370 4
