Description
| IRON | LOFT | LIE | WT | OFFST | BOUNCE | LENGTH | SWING |
| 3 | 18 | 59.5 | 242 | 4.8mm | 2 | 39.00” | D0 |
| 4 | 22 | 60.5 | 248 | 4.8mm | 2 | 38.50” | D0 |
| 5 | 26 | 61.0 | 254 | 4.8mm | 2 | 38.00” | D0 |
| 6 | 29 | 61.5 | 261 | 4.0mm | 3 | 37.50” | D0 |
| 7 | 32 | 62.0 | 268 | 4.0mm | 3 | 37.00” | D0 |
| 8 | 36 | 62.5 | 275 | 3.5mm | 3.5 | 36.50” | D0 |
| 9 | 40 | 63.0 | 282 | 3.5mm | 4 | 36.00” | D0 |
| PW | 44 | 64.0 | 289 | 2.8mm | 5 | 36.00” | D0 |
| GW | 50 | 64.0 | 296 | 2.0mm | 10 | 35.75” | D2 |
| SW | 54 | 64.0 | 296 | 1.0mm | 12 | 35.50” | D2 |
The S 400 iron compliments the S Square 400 driver by providing the fitter the ability to customize trajectory in a high MOI design. Weight ports allow for the clubmaker to dial-in the sweet spot during the fitting process by placing weight where the golfer needs it most.
PRODUCT HIGHLIGHTS
- 431-1 Face and Hosel for easier loft & lie adjustability and great feel.
- Adjustable weight ports allow the clubmaker to achieve either a fade, draw or neutral set up.
- Optional weights are available to dial in swing weights for shorter or longer club lengths.
- Deep under cut cavity for low center of gravity.
- Weight distribution with weight ports at toe and heel increases MOI of iron for better accuracy.
| DIMENSIONS | MATERIALS, CONSTRUCTION & FINISH |
| Inside Diameter: 8.6mm Outside Diameter: 12.3mm Bore Depth: 37mm Bulge: 14° Roll: 14° Face Angle: 0° | Construction: 2 Piece Cast Face: Beta Ti 15-3-3-3 Body: 6-4 Titanium Finish Paint: Black |