Description
To save and reuse a grip, we attempt to remove and re-install.
These are often not easy to remove and salvage; we recommend a new grip.
Includes: labor, tools, tape, solvent, supplies, etc.
Related Products

Pull Shaft and Install New Shaft in Head
MSRP:
Now:
$20.00
Was:
Service is for:pulling old shaft from head; clean and prep head hosel bore; prep shaft tip; install Black 3/4" ferrule; epoxy shaft in head, and cut to playing length.If you need playing length...

Install grip purchased from us
MSRP:
Now:
$2.00
Was:
Service is to install a grip you purchase from us.
For one grip add one to cart; for 8 grips as 8 to cart; etc.
Includes: labor, tools, tape, solvent, supplies, etc.

Install grip you provide
MSRP:
Now:
$5.00
Was:
Service is for one grip; for 8 grips add 8 to cart; etc. Includes: labor, tools, tape, solvent, supplies, etc.

Install Shaft In New Head
MSRP:
Now:
$15.00
Was:
Service includes clean and prep head hosel, prep shaft tip, install shaft and cut to playing length.

Shaft Install Kit 370 PT
MSRP:
Now:
$19.95
Was:
Shaft Install Kit .370 contains: Rubber Shaft Clamp 3 1/2" long .85 oz. Brampton 5&10 RAPID CURE epoxy cartridge 12 .370 Parallel tip ferrules 3/4" long Black non-collared ...
Customers Also Viewed

Install grip purchased from us
MSRP:
Now:
$2.00
Was:
Service is to install a grip you purchase from us.
For one grip add one to cart; for 8 grips as 8 to cart; etc.
Includes: labor, tools, tape, solvent, supplies, etc.

Cut Tip on .370 Parallel Tip Shaft to your Specification
MSRP:
Now:
$3.00
Was:
Most .370 parallel tip shafts are all the same length and need to be tipped differently for each iron.Note: Some .370 tip shaft models that are discrete lengths(pre-tipped by manufacurer);...

Install grip you provide
MSRP:
Now:
$5.00
Was:
Service is for one grip; for 8 grips add 8 to cart; etc. Includes: labor, tools, tape, solvent, supplies, etc.

Pull Shaft and Install New Shaft in Head
MSRP:
Now:
$20.00
Was:
Service is for:pulling old shaft from head; clean and prep head hosel bore; prep shaft tip; install Black 3/4" ferrule; epoxy shaft in head, and cut to playing length.If you need playing length...

Cut Tip & Butt end of .370 Shaft to your Specification
MSRP:
Now:
$5.00
Was:
NOTE: .370 Parallel Tip shafts need the tip cut different for each iron length; then butt cut to playing length. Service is for cutting one shaft; for 8 shafts add 8 to cart; etc...

Hybrid Shaft Adapter Sleeves .370 Tip
MSRP:
Now:
$15.00
Was:
Our Hybrid Shaft Adapter Sleeves allow players to quickly change club heads within seconds, so all you need is to cut to the playing length you want and install a grip to start playing. If you do not...

Golf Pride MCC Plus4 Golf Club Grips
Golf Pride
MSRP:
Now:
$10.49 - $10.99
Was:
Golf Pride MCC Plus4 golf club grips are tour proven hybrid golf club grips made of soft rubber material, as well as, a large lower hand section. MCC Plus4 has a lighter grip pressure with increase...

Find Shaft Spine and mark for alignment
MSRP:
Now:
$3.00
Was:
All shafts have spines that are caused by manufacturing processes and variations; some are weak and some are stronger. Shaft spines cause a shaft to bend more easily in one direction than in other...

Mitsubishi DIAMANA D LIMITED EDITION Driver Shafts - Graphite - .335 Tip
Mitsubishi
MSRP:
$500.00
Now:
$450.00
Was:
The legendary performance of our low-launching White Board profile is now available globally, including Asia and Japan. Featuring our DIALEAD Pitch Fiber and Tough-QURE Resin System for maximum...

Install Shaft In New Head
MSRP:
Now:
$15.00
Was:
Service includes clean and prep head hosel, prep shaft tip, install shaft and cut to playing length.