Description
We recommend prepping tips at time of installation.
Service is for cutting one shaft; for 8 shafts add 8 to cart; etc.
The longer a tip has been prepped before installation the more likely it will be contaminated; steel oxidation does start immediately and foreign particles(dirt) can collect; these can cause epoxy not to adhere properly and fail.
If you do not have the ability to prep tips your self, we will do it just before we ship and put shaft in a sleeve to minimize contamination during shipping.
We recommend installing prepped tips as soon as possible after you receive them to avoid failures.
We do not warrant that our prepping service will prevent failures.
Related Products

Prep Graphite .370 Parallel Shaft Tip for .355 Taper Tip Hosel
MSRP:
Now:
$7.00
Was:
Service is for tapering the tip of a .370 parallel graphite shaft to fit .355 taper tip hosel; approx 1" long prep. We recommend prepping tips at time of installation. The longer a tip has...

Graphite Design Driver Shafts - Graphite - .335g Tip
Graphite Design
MSRP:
$550.00
Now:
$419.00
Was:
Graphite Design Tour AD M9003 Driver Shafts were modeled after a very popular prototype shaft on the US and Japanese tours in the 90’s through the early 2000’s. The Tour AD M9003...

Aerotech STEELFIBER Iron Shafts - Graphite - .370 Tip
Aerotech
MSRP:
$61.00
Now:
$51.00 - $408.00
Was:
Aerotech Steelfiber Iron Shafts are available in several weight and flex options. Players can choose from the i70, i80, i95, i110, and the i125 depending on how heavy they like their shafts. ...

AeroTech STEELFIBER Driver shafts - Graphite - .350 Tip
Aerotech
MSRP:
$89.00
Now:
$82.00
Was:
Our AeroTech SteelFiber Driver shafts are available in three weight options / models of SS65, SS75, and SS85.AeroTech engineers designed their SteelFiber series with a graphite inner core surrounded...

AeroTech GENER8 Iron Shafts - Graphite - .370 Tip
Aerotech
MSRP:
$50.00
Now:
$35.00
Was:
All-new AeroTech GENER8 Iron Shafts - 370 PT - Graphite are specifically designed for golfers looking for a high-performance graphite shaft that produces longer, higher and consistent ball...
Customers Also Viewed

Cut Butt end of Shaft to your Specification
MSRP:
Now:
$3.00
Was:
.355 Taper Tip shafts are butt cut only shafts. Service is for cutting one shaft; for 8 shafts add 8 to cart; etc. Normally, shafts are installed before butt cutting the shaft, to...

Adapter Sleeve Installed on .335 Tip Driver Shaft
MSRP:
Now:
$29.00
Was:
We Install the Adapter Sleeve for you, and butt cut shaft to the playing length you specify in "Notes to Seller" during checkout.
If you also want us to install a grip, add your favorite grip to...

Prep Graphite .370 Parallel Shaft Tip for .355 Taper Tip Hosel
MSRP:
Now:
$7.00
Was:
Service is for tapering the tip of a .370 parallel graphite shaft to fit .355 taper tip hosel; approx 1" long prep. We recommend prepping tips at time of installation. The longer a tip has...

Align Spine for head or adapter sleeve
MSRP:
Now:
$5.00
Was:
Find Shaft Spine and mark for alignment in head. or adapter sleeve.
All shafts have spines that are caused by manufacturing processes and variations; some are weak and some are stronger.
Shaft...

Cut Tip on .370 Parallel Tip Shaft to your Specification
MSRP:
Now:
$3.00
Was:
Most .370 parallel tip shafts are all the same length and need to be tipped differently for each iron.Note: Some .370 tip shaft models that are discrete lengths(pre-tipped by manufacurer);...

Adapter Sleeve for Hybrid Shaft .370 tip(not installed)
MSRP:
Now:
$15.00
Was:
Our Hybrid Shaft Adapter Sleeves allow players to quickly change club heads within seconds, so all you need is to cut to the playing length you want and install a grip to start playing.
If you do...

Adapter Sleeve for Driver Shaft .335 tip(not installed)
MSRP:
Now:
$15.00
Was:
Shaft Adapter Sleeves allow you to mount or change the heads on your shafts. The shaft adapter is usually used on drivers or woods but can be used on the golf club shaft of your choice. They give...

Pull Shaft and Install New Shaft in Head
MSRP:
Now:
$20.00
Was:
Service is for:pulling old shaft from head; clean and prep head hosel bore; prep shaft tip; install Black 3/4" ferrule; epoxy shaft in head, and cut to playing length.If you need playing length...

Adapter Sleeve Installed on .350 Tip Driver Shaft
MSRP:
Now:
$29.00
Was:
We Install the Adapter Sleeve for you, and butt cut shaft to the playing length you specify in "Notes to Seller" during checkout. If you also want us to install a grip, add your favorite grip to your...

Install Shaft In New Head
MSRP:
Now:
$15.00
Was:
Service includes clean and prep head hosel, prep shaft tip, install shaft and cut to playing length.